JVC CA-UXA10DVD
Manual de Usuario

Moving a Track�MOVE
This function allows you to move a track to the position you prefer. It is useful to change the order of the tracks as you like. Once a track is moved, the tracks and/or the groups are renumbered. � To stop any time during the editing process before step 8, press MD TITLE/EDIT. On the remote control ONLY: In the following example, the process is explained from the very beginning�that is, inserting a disc. You can also edit an MD during playback (in normal play mode).

5 Press SET.
Track No. to be moved to

� To cancel the setting, press CANCEL, then repeat from step 4.

6 Press ¢ or 4 to select the position where you
want to move the track. � You can select the track using the number buttons. In this case, the selected track starts playing repeatedly.

1 Insert an MD you want to edit into the MD loading
slot.

2 Press MD TITLE/EDIT repeatedly until �MOVE ?�
appears in the main display.
Ex.: When track 3 is moved to track 8.

� If the track selected in this step belongs to a group, the track selected in step 4 will be entered into the same group after moving. � If the loaded MD has no tracks, �MOVE ?� will not appear. � If you want to stop this editing process, press CANCEL.

7 Press SET.

3 Press SET.
Track No. to be moved from

� To cancel the setting, press CANCEL, then repeat from step 4.

8 Press ENTER.
� If the loaded MD has only one track, you cannot go on to the following steps.

4 Press ¢ or 4 to select the track you want to
move. � You can select the track using the number buttons. In this case, the selected track starts playback repeatedly.

�EDITING� appears in the main display for a while, then �WRITING� and the MD REC indicator flashes while the changes you have made are recorded on the MD.

Ex.: When track 3 is selected.

78

English