JVC HR-S2902US
Manual de Usuario

� For Automatic Timer Standby Press REW (3 ), then press TIMER within 2 seconds.

NOTE:
Reverse Reverse search 3 steps Reverse play Reverse slow motion 1 step Slow motion 1 step Normal play Forward Forward search 4 steps

It is not possible to select the Automatic Timer Standby function if the cassette�s record safety tab is removed.

Playing back tape repeatedly (100 times) � Repeat Play
During playback, press and hold PLAY (4) for more than 5 seconds. The play indicator ($) on the display panel starts blinking slowly. To stop playback, press STOP (8) on the Remote or STOP/EJECT (0) on the VCR.

When the tape is not running
Rewind/fast-forward Press REW (3 ) or FF (5). Eject the cassette Press STOP/EJECT (0 ). � You can also eject the cassette when the VCR is turned off. Turn off the VCR Press POWER 1.

Locating beginning of recordings � Index Search
When recording on this VCR, index codes are placed on the tape at the beginning of each recording.

A While the tape is not running, press 2 or 6 on the Remote B
to start search. To access a recording of 2 to 9 index codes away, press 2 or 6 repeatedly until the correct number is displayed on the screen (only if �SUPERIMPOSE� is set to �ON� ( pg. 12)). Playback begins automatically when the desired recording is located.
Beginning of the current program recorded Previous program recorded Current position on the tape Next program recorded Beginning of the 2nd next program recorded

Playback Features
Turn on the VCR and TV, and select the VCR channel (or AV mode).

Adjusting tracking condition � Tracking Adjustment
Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback. Manual tracking adjustment If automatic tracking cannot eliminate noises well during playback, follow the procedures below. On the Remote A Press SP/EP during playback to activate manual tracking. B Press CHr/t to eliminate the noises. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment. � Press SP/EP again to reactivate automatic tracking.

2nd next

Locating beginning of timer recordings � Instant Review
After ensuring that the VCR is turned off and that the timer mode is disengaged, press REVIEW. � The VCR turns on, and rewinds to the index code indicating the beginning of the last timer-recorded program, then begins playback automatically. � You can access a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have 5 programs recorded and you want to watch the third one, press REVIEW three times. � The Instant Review function will also operate if the VCR is turned on.

Selecting monitor sound
While playing back a tape on which stereo sound or SAP sound is recorded, press A.MONITOR on the Remote. Each time you press the button, sound changes. HI-FI: Normally select this. Hi-Fi sound is played back. HI-FI L: Sound on the left Hi-Fi channel is played back. HI-FI R: Sound on the right Hi-Fi channel is played back. NORM: Sound on the normal track is played back. NORM HI-FI: Both sounds on the Hi-Fi track and normal track are mixed and played back.

� Audio Monitor

Skipping unwanted portions � Skip Search
Press SKIP SEARCH on the Remote once to 4 times during playback. Each press initiates a 30-second period of high speed playback (up to 2 minutes). When the specified portion of the tape is skipped, normal playback resumes automatically. To return to normal playback during Skip Search, press PLAY (4).

NOTE:
The above indication appears when �SUPERIMPOSE� is set to �ON� ( pg. 12), though the monitor sound changes in sequence.

Automatic operations after rewinding � Next Function Memory
The Next Function Memory �tells� the VCR what to do after rewinding is complete. Ensure that the VCR is in stop mode. � For Automatic Playback Start Press REW (3 ), then press PLAY (4) within 2 seconds. � For Automatic Power Off Press REW (3 ), then press POWER 1 within 2 seconds.

�8�