Is the voltage output at IC521 pin "40" 5V or 0V? YES Is 4V present at both sides of the feed motor? YES Check the feed motor.
3.2.2 Focus section
NO
Is the wiring for IC561 pin 27? NO
YES Is 3.3V present at IC561 pin "20"? YES Check the vicinity of IC521. YES Check the feed motor connection wiring.
NO Check CD 8V and 5V.
NO
Is 6V or 2V present at IC561 "4" and "5"? NO Check IC501.
When the lens is moving: 4V
Does the S-search waveform appear at IC561 pins "8" and "9"?
NO
Check the circuits in the vicinity of IC561 pins "8","9"and"15".
YES YES
Check the pickup and its connections
3.2.3 Spindle section
Is the disk rotated? YES Does the RF signal appear at RF test point? YES Is the RF waveform at RF test point distorted? YES Proceed to the Tracking section
3.2.4 Tracking section
NO
Is 4V present at IC561 pins "6" and "7"? YES Check the spindle motor and its wiring
NO
Is 4V present at IC521 pins "41" ? YES Check the vicinity of IC561.
NO
NO
Check IC521 and IC561.
Check the circuits in the NO vicinity of IC561 "19"~ "24" or the pickup
When the disc is rotated at first:
YES
Approx. 1.2V Is the tracking error signal output at IC501 "11"?
Check the circuit in the vicinity of IC501 pins "2"~"12".
