Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5958 visitantes online.
Productos
Información
Destacado
Inicio >> JVC >> SX-LC33MK2 Manual de Usuario
 
 0 artículo(s) en Su carrito 

JVC SX-LC33MK2
Manual de Usuario


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English, Japanese, Chinese Traditional
Precio: $4.99

Descripción del JVC SX-LC33MK2 Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como archivo PDF después de que lo compre.

El Manual del Propietario (a veces llamado Manual del Usuario o Guía del Usuario) contiene información sobre cómo utilizar su dispositivo. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English, Japanese, Chinese Traditional

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
English

English

English

中�

中�

中

�

7 Attaching the feet
Attach the supplied feet on the bottom of the speaker, so that you can protect the speaker cabinet, decrease the vibration of the speaker cabinet and prevent the speaker from slipping. � Place a large, thick cloth under the speaker in order to protect the floor and the speaker. When installing the speaker vertically

7 To remove the speaker grille
To remove the speaker grille, insert your fingers at the bottom of the speaker grille, then pull upward.

7 Connecting the speaker cord to the speaker
Connect the speaker cord to the speaker as follows.

7 ����
����帶�������������以便�護����殼�� �����殼�����止������ � ���������張大����以便�護������� ���������

7 �������罩網
������罩網����������罩網���������

7 �������������
��������������������

1 Twist and remove the insulation at the end of each speaker cord before connecting.

1 ���������根������端��緣��

1 Stand the speaker upside down. 2 Attach the feet.
Peel off Bottom

1 �����置�起� 2 �����
���� ��

2 Rotate the speaker terminal knob counterclockwise and fit the speaker cord into the groove. Then rotate the knob clockwise to
secure the cord.
Tighten �������件�

2 ����������端���������������槽 �������������以�����
�� ª 端� ���

������罩網���������������罩網���� �� � ���度�������罩網�
· 端� ���

Feet (black: supplied)

To attach the speaker grille, put the projections of the speaker into the holes of the speaker grille. � Do not push the speaker grille strongly.

ª terminal (Red) · terminal (Black) Loosen Copper To the speaker ª terminal of amplifier To the speaker · terminal of amplifier

��
�水平������
��絲����������

�� �� �� ����大����� ª 端� ����大����� · 端�

Connection
When installing the speaker horizontally Install the speaker with the screw holes facing rightward.
Silver

7 ����系統������大��
������� � ������系統����������大��������� ������ � ��������� 6 �������系統������大�� �����檢����大��夠�������������� �����������大�������������便�� �該���系統������大��� � SX-LC33MK2 ��大����� 120 W���該�以��信�� �������常��並������� � ���������確�調���水平�以�止���常��� � ��������件� � �����大�� � 調� FM ��� � 快����帶� � �����頻����調���� � �使�麥�風���������������������使 ����顫���������� � ����頭����������������������� �����
�絲��� �����件�

7 Connecting the speaker system to the amplifier
Before connection� � Turn off the power to the amplifier before connecting the speaker system; otherwise, the speakers may be damaged. � The impedance of the speaker is 6 �. Before connecting it to your amplifier, check the speaker impedance range of your amplifier. If the impedance of this speaker is out of the speaker impedance range indicated on the amplifier, you cannot connect this system to the amplifier. � The maximum power handling capacity of the SX-LC33MK2 is 120 W. Excessive input will result in abnormal noise and possible damage. � Be sure to turn down the volume level to prevent unwanted noise before performing following operations: � � � � Turning on or off other components, Operating the amplifier, Tuning FM stations, Fast-forwarding a tape,

About speaker cords�to improve the sound quality
�絲�

��������������質�
�� OFC �� ��������������以 OFC��氧��製��此種 OFC ��������質����� ��������� 確���極��ª � ·�������������失� ������檢�裸�����������端��� �使��������� �������� � 購買��������買�����買細��������� �� � ��使��������������質����� � �左置��置���使����度������� � 使�����������辮���軸���帶������ ���������影���質��

Screw holes

1 Place the speaker with the side, where you attach the feet, facing upward. 2 Attach the feet. 3 Attach the screw hole covers to the screw holes. Screw holes on the side are designed for installing Speaker Stand LS-M1 (purchased separately), when LS-M1 is not used, use the screw hole covers to hide the holes.
Peel off Feet (black: supplied) Peel off

About the OFC cord The core wires of the supplied speaker cords are made of OFC (Oxygen Free Copper). This OFC cord enables high quality sound reproduction. When connecting the speaker cords Make sure to match the polarity (ª and ·); otherwise, the surround effect will become less effective. After connecting, check that the exposed cores are fully inserted into the terminal. When using other speaker cords Observe the following; � Buy thick speaker cords rather than thin cords, and make them as short as possible for connection. � Do not use long speaker cords; otherwise, the sound quality may deteriorate. � Use speaker cords of the same length for both left and right speakers. � Using a special speaker cord such as a litz wire, a coaxial cable, or a cord which has the specified connecting directionality may influence the sound quality.

1 ���������以便����� 2 ����� 3 ��絲�������絲��
����絲���������� LS-M1��購�件��設� ����使� LS-M1 ��使��絲�����絲����
���� �� �����件�

����

� Continuously reproducing high frequency oscillation or high pitch electronic sounds.
Screw hole covers (brown: supplied)

Installing on LS-M1 (purchased separately) Unpacking the feet supplied for LS-M1. � Refer also to the manual supplied for LS-M1 for installation. 1 Peel off the feet, then attach them at the four corners of the top plate of LS-M1. 2 Install this unit on LS-M1.
Peel off

� When using a microphone, do not aim it at the speakers or use it near the speakers; otherwise, the howling which occurs may damage the speakers. � Before replacing the cartridge, always turn off the power to the turntable; otherwise, the clicking noise may damage the speakers.

�� LS-M1 (�購�件) �� LS-M1 �屬���� � �� LS-M1 ��������� LS-M1 �帶�使�說���

1 �������貼� LS-M1 �������� 2 ����置� LS-M1 ��

���� SX-LC33MK2 LS-M1 �������件� Top Feet (black: supplied)

SX-LC33MK2 LS-M1 ��

Do not lean the speaker when installing; otherwise, the speaker may fall over.

����������������������

Quizás también quiera comprar

$4.99

SX-K700 TECHNICS
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …

$4.99

CJ-V51 PIONEER
Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo genera…

$4.99

GRAND PRIX ELECTRONIC 754 BECKER
Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo genera…

$4.99

SX-PR602 TECHNICS
Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo genera…

$4.99

EV-S1000E SONY
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …

$4.99

GRAND PRIX ELECTRONIC 780 BECKER
Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo genera…

$4.99

AG7330 PANASONIC
Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo genera…

$4.99

EVO-9850 VOLUME 1 SONY
Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo genera…
>
Parse Time: 1.952 - Number of Queries: 126 - Query Time: 0.904